Table values in bold text are the default value for that setting.

Measurement Units

The configuration file now accepts units entered in inches (8.50in) or centimeters (21.59cm), provided the unit designation of inches (in) or centimeters (cm) is given.

To maintain compatibility with previous versions of the driver, the old method of entering units in as hundredths of an inch (.01 Inches) or tenths of a millimeter(.1 Millimeters) is still supported.

Keywords

Accepted Values

Description

Units

.01 Inches

Units are in hundredths of an inch

 

.1 Millimeters

Units are in tenths of a millimeter

Custom Paper Enable

0

Disabled

 

1

Enabled

Custom Paper Width

25 - 8000000

(default = 850)

Range in hundredths of an inch

 

64 - 20000000

Range in tenths of a millimeter

 

0.250in - 80000.000in

Range in inches

 

0.640cm-200000.000cm

Range in centimeters

Custom Paper Height

25 - 8000000

(default = 1100)

Range in hundredths of an inch

 

64 - 20000000

Range in tenths of a millimeter

 

0.250in - 80000.000in

Range in inches

 

0.640cm-200000.000cm

Range in centimeters

Hardware Margin Left

0 - 100 (default = 0)

Range in hundredths of an inch

 

0 - 254

Range in tenths of a millimeter

 

0.000in-1.000in

Range in inches

 

0.000cm-2.540cm

Range in centimeters

Hardware Margin Top

0 - 100 (default = 0)

Range in hundredths of an inch

 

0 - 254

Range in tenths of a millimeter

 

0.000in-1.000in

Range in inches

 

0.000cm-2.540cm

Range in centimeters

Printer Area Margin Left

0 - 8000000 (default = 0)

Range in hundredths of an inch

 

0 - 20000000

Range in tenths of a millimeter

 

0.000in - 80000.000in

Range in inches

 

0.000cm-200000.000cm

Range in centimeters

Printer Area Margin Top

0 - 8000000 (default = 0)

Range in hundredths of an inch

 

0 - 20000000

Range in tenths of a millimeter

 

0.000in - 80000.000in

Range in inches

 

0.000cm-200000.000cm

Range in centimeters

Printer Area Margin Right

0 - 8000000 (default = 0)

Range in hundredths of an inch

 

0 - 20000000

Range in tenths of a millimeter

 

0.000in - 80000.000in

Range in inches

 

0.000cm-200000.000cm

Range in centimeters

Printer Area Margin Bottom

0 - 8000000 (default = 0)

Range in hundredths of an inch

 

0 - 20000000

Range in tenths of a millimeter

 

0.000in - 80000.000in

Range in inches

 

0.000cm-200000.000cm

Range in centimeters

Extract Text

0 (default)

Disabled

 

1

Enabled

Extract Text Filepath

PATH

Path to file receiving extracted text

Extract Text Layout

Physical

Match the format of the text in the original file.

 

Raw

Saves the text in the order in which it was sent to the driver. This may not be the same order in the original file.

 

None

No formatting is attempted. All text is written to the file as it is received

Extract Text Encoding

ANSI

ASCII encoded text

 

UTF-8

UTF-8 encoded text

 

UTF-16

UTF-16 encoded text

Extract Text EOL

Windows

Lines end with the CRLF line feed

 

Mac

Lines end with the LF line feed

 

Unix

Lines end with the CR line feed

Extract Text Emit Page Breaks

0

Page breaks are not emitted

 

1

Page breaks are emitted

Control Strings Enabled

0

Disabled

 

1

Enabled

Control String Prefix

Unicode character

The prefix to use to recognize the start of a control string pattern; default is ~0%.

Control String Suffix

Unicode character

The suffix to use to determine the end of a control string pattern; default is ?.