Name:
|
Advanced Features;Units
Specifies what unit of measurement is used for settings such as custom paper width or hardware margin. Units can be entered in inches (8.50in) or centimeters (21.59cm), provided the unit designation of inches (in) or centimeters (cm) is given. Also accepted are units entered in as hundredths of an inch (.01 Inches) or tenths of a millimeter(.1 Millimeters).
|
Values:
|
.01 Inches
.1 Millimeters
|
|
Name:
|
Advanced Features;Custom Paper Enable
Enable or disable custom paper size.
|
Values:
|
0 - disable custom paper size
1 - enable custom paper size
|
|
Name:
|
Advanced Features;Custom Paper Width
Specify the width of the custom paper size. Custom Paper Enable must be 1 for this to be used.
|
Values:
|
25 - 8000000 (default 850) - Range in hundredths of an inch
64 - 20000000 - Range in tenths of a millimeter
0.250in - 80000.000in - Range in inches
0.640cm-200000.000cm - Range in centimeters
|
|
Name:
|
Advanced Features;Custom Paper Height
Specify the height of the custom paper size. Custom Paper Enable must be 1 for this to be used.
|
Values:
|
25 - 8000000 (default 1100) - Range in hundredths of an inch
64 - 20000000 - Range in tenths of a millimeter
0.250in - 80000.000in - Range in inches
0.640cm-200000.000cm - Range in centimeters
|
|
Name:
|
Advanced Features;Hardware Margin Left
|
Values:
|
0 - 100 (default = 0) - Range in hundredths of an inch
0 - 254 - Range in tenths of a millimeter
0.000in-1.000in - Range in inches
0.000cm-2.540cm - Range in centimeters
|
|
Name:
|
Advanced Features;Hardware Margin Top
|
Values:
|
0 - 100 (default = 0) - Range in hundredths of an inch
0 - 254 - Range in tenths of a millimeter
0.000in-1.000in - Range in inches
0.000cm-2.540cm - Range in centimeters
|
|
Name:
|
Advanced Features;Printer Area Margin Left
|
Values:
|
0 - 8000000 (default = 0) - Range in hundredths of an inch
0 - 20000000 - Range in tenths of a millimeter
0.000in - 80000.000in - Range in inches
0.000cm-200000.000cm - Range in centimeters
|
|
Name:
|
Advanced Features;Printer Area Margin Top
|
Values:
|
0 - 8000000 (default = 0) - Range in hundredths of an inch
0 - 20000000 - Range in tenths of a millimeter
0.000in - 80000.000in - Range in inches
0.000cm-200000.000cm - Range in centimeters
|
|
Name:
|
Advanced Features;Printer Area Margin Right
|
Values:
|
0 - 8000000 (default = 0) - Range in hundredths of an inch
0 - 20000000 - Range in tenths of a millimeter
0.000in - 80000.000in - Range in inches
0.000cm-200000.000cm - Range in centimeters
|
|
Name:
|
Advanced Features;Printer Area Margin Bottom
|
Values:
|
0 - 8000000 (default = 0) - Range in hundredths of an inch
0 - 20000000 - Range in tenths of a millimeter
0.000in - 80000.000in - Range in inches
0.000cm-200000.000cm - Range in centimeters
|
|
Name:
|
Advanced Features;Extract Text
Enable this to also create a separate text file containing all of the textual elements of your source document.
|
Values:
|
0 - do not extract text
1 - extract text into a separate text file
|
|
Name:
|
Advanced Features;Extract Text Filepath
Path to file receiving extracted text.
|
Values:
|
Full path to file to store text.
|
|
Name:
|
Advanced Features;Extract Text Layout
Choose the layout of the text file.
|
Values:
|
Physical
Matches the format of the text in the original file.
Raw
Saves the text in the order in which it was sent to the driver. This may not be the same order in the original file.
None
No formatting is attempted. All text is written to the file as it is received
|
|
Name:
|
Advanced Features;Extract Text Encoding
Choose the encoding of the text file.
|
Values:
|
ANSI
UTF-8
UTF-16
|
|
Name:
|
Advanced Features;Extract Text EOL
|
Values:
|
Windows
Lines end with the CRLF line feed
Mac
Lines end with the LF line feed
Unix
Lines end with the CR line feed
|
|
Name:
|
Advanced Features;Extract Text Emit Page Breaks
|
Values:
|
0
1
|
|
Name:
|
Advanced Features;Control Strings Enabled
|
Values:
|
0
1
|
|